Range Rover V8 Electronic Fuel Injection and 200 TDi Diesel
6 Months
6,000 Miles
10,000 Km
(which ever occurs first) |
12 Months
12,000 Miles
20,000 Km
(which ever occurs first) |
18 Months
18,000 Miles
30,000 Km
(which ever occurs first) |
24 Months
24,000 Miles
40,000 Km
(which ever occurs first) |
30 Months
30,000 Miles
50,000 Km
(which ever occurs first) |
36 Months
36,000 Miles
60,000 Km
(which ever occurs first) |
42 Months
42,000 Miles
70,000 Km
(which ever occurs first) |
48 Months
48,000 Miles
80,000 Km
(which ever occurs first) |
| |
|
|
|
|
|
|
|
54 Months
54,000 Miles
90,000 Km
(which ever occurs first) |
60 Months
60,000 Miles
100,000 Km
(which ever occurs first) |
66 Months
66,000 Miles
110,000 Km
(which ever occurs first) |
72 Months
72,000 Miles
120,000 Km
(which ever occurs first) |
78 Months
78,000 Miles
130,000 Km
(which ever occurs first) |
84 Months
84,000 Miles
140,000 Km
(which ever occurs first) |
90 Months
90,000 Miles
150,000 Km
(which ever occurs first) |
|
6 Months or 6,000 Miles/10,000 Km (which ever occurs first)
Main Service (Vehicle Interior)
- Check condition and security of seats and seatbelts, seatbelt mountings, seatbelt buckles and operation of inertia seatbelts
- Check operation of electrical, memory, heated and mechanical seats (where applicable)
- Check operation of foot brake and clutch
- Check operation of all lamps, horns, warning indicators
- Check operation of front/rear wipers and washers and condition of wiper blades
- Check security and operation of handbrake
Main Service (Vehicle Exterior)
- Check headlamp and auxiliary lamp operation
- Check headlamp levelling system (where applicable)
- Remove road wheels
- Inspect brake pads for wear, calipers for leaks and discs for condition
- Refit road wheels to original hub position
- Check operation of all doors, bonnet and tail door locks
- Lubricate all hinges, door-check mechanisms, bonnet catches and fuel flaps
Main Service (Under Bonnet)
- Check cooling and heater systems for leaks, hoses for security and condition
- Check brake servo hose for security and condition
- Check condition of heater plug wiring for fraying, chafing and deterioration (200 TDi)
- Check ignition wiring and H.T. leads for fraying, chafing and deterioration
- Check distributor cap, check for cracks and tracking
- Check/adjust valve clearances (at first 6,000 miles and every 12,000) (200 TDi)
- Check crankcase breathing system for leaks, hoses for security and condition
- Check condition of driving belts (adjust if required)
- Check throttle and automatic transmission cable operation
- Check/top up automatic transmission fluid
- Check/top up cooling system
- Check/top up fluid in power steering reservoir
- Check/top up clutch fluid reservoirs
- Check/top up brake fluid reservoirs
- Check/top up windscreen and rear washer reservoir
- Lubricate accelerator control linkages and pedal pivot
- Check/adjust ignition timing
- Check/adjust engine idle speed (200 TDi)
- Check/adjust steering box
- Remove battery connections - clean, grease and refit
- Visually check intercooler for external obstructions (200 TDi)
Main Service (Under Vehicle)
- Renew engine oil and filter (200 TDi)
- Renew engine oil and filter (V8 engine only)
- Check/top up gearbox oil
- Check/top up transfer box oil
- Check/top up front axle oil
- Check/top up swivel pin housing oil
- Check/top up rear axle oil
- Lubricate propeller shaft sliding joints
- Lubricate propeller shaft universal joints
- Lubricate handbrake mechanical linkage
- Visually check brake, fuel, clutch pipes/unions for chafing, leaks and corrosion
- Check exhaust system for leaks, security and damage
- Check for fluid leaks from power, manual steering and suspension systems, hydraulic pipes and unions for chafing and corrosion
- Check/tighten steering unit and steering rod ball joint fixings, check condition of ball joints and dust covers
- Check air harness pipes for security and damage
- Check air springs for security and damage
- Check shock absorbers/height sensors and harness assembly for leakage and damage
- Check tightness of propeller shaft coupling bolts
- Check/tighten front and rear axle suspension link fixings, check condition of mounting rubbers
- Check for oil leaks from engine and transmission
- Check/tighten fuel tank fixings
- Check security of towing bracket
- Check chassis frame and brackets for damage
- Check condition of engine mounting rubbers
- Check road wheel speed sensor electrical harness for damage (ABS only)
- Adjust handbrake if required
- Carry out road roller test
- Endorse service record and report any unusual features of vehicle condition and additional work required
Back to top
12 Months or 12,000 Miles/20,000 Km (which ever occurs first)
Main Service (Vehicle Interior)
- Check condition and security of seats and seatbelts, seatbelt mountings, seatbelt buckles and operation of inertia seatbelts
- Check operation of electrical, memory, heated and mechanical seats (where applicable)
- Check operation of foot brake and clutch
- Check operation of all lamps, horns, warning indicators
- Check operation of front/rear wipers and washers and condition of wiper blades
- Check security and operation of handbrake
Main Service (Vehicle Exterior)
- Check headlamp and auxiliary lamp operation
- Check headlamp levelling system (where applicable)
- Remove road wheels
- Inspect brake pads for wear, calipers for leaks and discs for condition
- Refit road wheels to original hub position
- Check operation of all doors, bonnet and tail door locks
- Lubricate all hinges, door-check mechanisms, bonnet catches and fuel flaps
Main Service (Under Bonnet)
- Check cooling and heater systems for leaks, hoses for security and condition
- Check brake servo hose for security and condition
- Check condition of heater plug wiring for fraying, chafing and deterioration (200 TDi)
- Check ignition wiring and H.T. leads for fraying, chafing and deterioration
- Check distributor cap, check for cracks and tracking
- Renew spark plugs
- Check/adjust valve clearances (at first 6,000 miles and every 12,000) (200 TDi)
- Renew fuel filter element (200 TDi)
- Check crankcase breathing system for leaks, hoses for security and condition
- Renew air cleaner element(s)
- Check air cleaner dump valve, clean or renew
- Clean engine breather filter
- Check condition of driving belts (adjust if required)
- Check throttle and automatic transmission cable operation
- Check/top up automatic transmission fluid
- Check/top up cooling system
- Check/top up fluid in power steering reservoir
- Check/top up clutch fluid reservoirs
- Check/top up brake fluid reservoirs
- Check/top up windscreen and rear washer reservoir
- Lubricate accelerator control linkages and pedal pivot
- Check/adjust ignition timing
- Check/adjust engine idle speed (200 TDi)
- Check/adjust steering box
- Remove battery connections - clean, grease and refit
- Visually check intercooler for external obstructions (200 TDi)
Main Service (Under Vehicle)
- Renew engine oil and filter (200 TDi)
- Renew engine oil and filter (V8 engine only)
- Check/top up gearbox oil
- Check/top up transfer box oil
- Check/top up front axle oil
- Check/top up swivel pin housing oil
- Check/top up rear axle oil
- Lubricate propeller shaft sliding joints
- Lubricate propeller shaft universal joints
- Lubricate handbrake mechanical linkage
- Visually check brake, fuel, clutch pipes/unions for chafing, leaks and corrosion
- Check exhaust system for leaks, security and damage
- Check for fluid leaks from power, manual steering and suspension systems, hydraulic pipes and unions for chafing and corrosion
- Check/tighten steering unit and steering rod ball joint fixings, check condition of ball joints and dust covers
- Check air harness pipes for security and damage
- Check air springs for security and damage
- Check shock absorbers/height sensors and harness assembly for leakage and damage
- Check tightness of propeller shaft coupling bolts
- Ensure front and rear axle breathers are free from obstruction
- Check/tighten front and rear axle suspension link fixings, check condition of mounting rubbers
- Check for oil leaks from engine and transmission
- Clean fuel sedimentor (200 TDi)
- Drain flywheel housing if drain plug is fitted for wading (refit)
- Check/tighten fuel tank fixings
- Check security of towing bracket
- Check chassis frame and brackets for damage
- Check condition of engine mounting rubbers
- Check road wheel speed sensor electrical harness for damage (ABS only)
- Adjust handbrake if required
- Carry out road roller test
- Endorse service record and report any unusual features of vehicle condition and additional work required
Back to top
18 Months or 18,000 Miles/30,000 Km (which ever occurs first)
Main Service (Vehicle Interior)
- Check condition and security of seats and seatbelts, seatbelt mountings, seatbelt buckles and operation of inertia seatbelts
- Check operation of electrical, memory, heated and mechanical seats (where applicable)
- Check operation of foot brake and clutch
- Check operation of all lamps, horns, warning indicators
- Check operation of front/rear wipers and washers and condition of wiper blades
- Check security and operation of handbrake
Main Service (Vehicle Exterior)
- Check headlamp and auxiliary lamp operation
- Check headlamp levelling system (where applicable)
- Remove road wheels
- Inspect brake pads for wear, calipers for leaks and discs for condition
- Refit road wheels to original hub position
- Check operation of all doors, bonnet and tail door locks
- Lubricate all hinges, door-check mechanisms, bonnet catches and fuel flaps
Main Service (Under Bonnet)
- Check cooling and heater systems for leaks, hoses for security and condition
- Check brake servo hose for security and condition
- Check condition of heater plug wiring for fraying, chafing and deterioration (200 TDi)
- Check ignition wiring and H.T. leads for fraying, chafing and deterioration
- Check distributor cap, check for cracks and tracking
- Check crankcase breathing system for leaks, hoses for security and condition
- Check condition of driving belts (adjust if required)
- Check throttle and automatic transmission cable operation
- Check/top up automatic transmission fluid
- Check/top up cooling system
- Check/top up fluid in power steering reservoir
- Check/top up clutch fluid reservoirs
- Check/top up brake fluid reservoirs
- Check/top up windscreen and rear washer reservoir
- Lubricate accelerator control linkages and pedal pivot
- Check/adjust ignition timing
- Check/adjust engine idle speed (200 TDi)
- Check/adjust steering box
- Remove battery connections - clean, grease and refit
- Visually check intercooler for external obstructions (200 TDi)
Main Service (Under Vehicle)
- Renew engine oil and filter (200 TDi)
- Renew engine oil and filter (V8 engine only)
- Check/top up gearbox oil
- Check/top up transfer box oil
- Check/top up front axle oil
- Check/top up swivel pin housing oil
- Check/top up rear axle oil
- Lubricate propeller shaft sliding joints
- Lubricate propeller shaft universal joints
- Lubricate handbrake mechanical linkage
- Visually check brake, fuel, clutch pipes/unions for chafing, leaks and corrosion
- Check exhaust system for leaks, security and damage
- Check for fluid leaks from power, manual steering and suspension systems, hydraulic pipes and unions for chafing and corrosion
- Check/tighten steering unit and steering rod ball joint fixings, check condition of ball joints and dust covers
- Check air harness pipes for security and damage
- Check air springs for security and damage
- Check shock absorbers/height sensors and harness assembly for leakage and damage
- Check tightness of propeller shaft coupling bolts
- Check/tighten front and rear axle suspension link fixings, check condition of mounting rubbers
- Check for oil leaks from engine and transmission
- Check/tighten fuel tank fixings
- Check security of towing bracket
- Check chassis frame and brackets for damage
- Check condition of engine mounting rubbers
- Check road wheel speed sensor electrical harness for damage (ABS only)
- Adjust handbrake if required
- Carry out road roller test
- Endorse service record and report any unusual features of vehicle condition and additional work required
Back to top
24 Months or 24,000 Miles/40,000 Km (which ever occurs first)
Main Service (Vehicle Interior)
- Check condition and security of seats and seatbelts, seatbelt mountings, seatbelt buckles and operation of inertia seatbelts
- Check operation of electrical, memory, heated and mechanical seats (where applicable)
- Check operation of foot brake and clutch
- Check operation of all lamps, horns, warning indicators
- Check operation of front/rear wipers and washers and condition of wiper blades
- Check security and operation of handbrake
- Depressurise air suspension system
- Renew compressor inlet filter
- Remove/refit air reservoir drain plug (if evidence of water in system, replace air dryer)
Main Service (Vehicle Exterior)
- Check headlamp and auxiliary lamp operation
- Check headlamp levelling system (where applicable)
- Remove road wheels
- Inspect brake pads for wear, calipers for leaks and discs for condition
- Refit road wheels to original hub position
- Check operation of all doors, bonnet and tail door locks
- Lubricate all hinges, door-check mechanisms, bonnet catches and fuel flaps
Main Service (Under Bonnet)
- Check cooling and heater systems for leaks, hoses for security and condition
- Check brake servo hose for security and condition
- Check condition of heater plug wiring for fraying, chafing and deterioration (200 TDi)
- Check ignition wiring and H.T. leads for fraying, chafing and deterioration
- Check distributor cap, check for cracks and tracking
- Lubricate distributor rotor spindle with rotor arm removed (V8 engines only)
- Renew spark plugs
- Check/adjust valve clearances (at first 6,000 miles and every 12,000) (200 TDi)
- Renew fuel filter element (200 TDi)
- Check crankcase breathing system for leaks, hoses for security and condition
- Renew air cleaner element(s)
- Check air cleaner dump valve, clean or renew
- Clean engine breather filter
- Clean plenum chamber ventilation passageway (V8 engine only)
- Check condition of driving belts (adjust if required)
- Check throttle and automatic transmission cable operation
- Check/top up cooling system
- Check/top up fluid in power steering reservoir
- Check/top up clutch fluid reservoirs
- Check/top up brake fluid reservoirs
- Check/top up windscreen and rear washer reservoir
- Lubricate accelerator control linkages and pedal pivot
- Check/adjust ignition timing
- Check/adjust engine idle speed (200 TDi)
- Check/adjust steering box
- Remove battery connections - clean, grease and refit
- Visually check intercooler for external obstructions (200 TDi)
Main Service (Under Vehicle)
- Renew engine oil and filter (200 TDi)
- Renew engine oil and filter (V8 engine only)
- Renew gearbox oil
- Renew transfer box oil
- Renew automatic transmission fluid and filter
- Renew front axle oil
- Renew swivel pin housing oil
- Renew rear axle oil
- Lubricate propeller shaft sliding joints
- Lubricate propeller shaft universal joints
- Lubricate handbrake mechanical linkage
- Visually check brake, fuel, clutch pipes/unions for chafing, leaks and corrosion
- Check exhaust system for leaks, security and damage
- Check for fluid leaks from power, manual steering and suspension systems, hydraulic pipes and unions for chafing and corrosion
- Check/tighten steering unit and steering rod ball joint fixings, check condition of ball joints and dust covers
- Check air harness pipes for security and damage
- Check air springs for security and damage
- Check shock absorbers/height sensors and harness assembly for leakage and damage
- Check tightness of propeller shaft coupling bolts
- Ensure front and rear axle breathers are free from obstruction
- Check/tighten front and rear axle suspension link fixings, check condition of mounting rubbers
- Check for oil leaks from engine and transmission
- Clean fuel sedimentor (200 TDi)
- Drain flywheel housing if drain plug is fitted for wading (refit)
- Check/tighten fuel tank fixings
- Check security of towing bracket
- Check chassis frame and brackets for damage
- Check condition of engine mounting rubbers
- Check road wheel speed sensor electrical harness for damage (ABS only)
- Adjust handbrake if required
- Carry out road roller test
- Endorse service record and report any unusual features of vehicle condition and additional work required
Back to top
30 Months or 30,000 Miles/50,000 Km (which ever occurs first)
Main Service (Vehicle Interior)
- Check condition and security of seats and seatbelts, seatbelt mountings, seatbelt buckles and operation of inertia seatbelts
- Check operation of electrical, memory, heated and mechanical seats (where applicable)
- Check operation of foot brake and clutch
- Check operation of all lamps, horns, warning indicators
- Check operation of front/rear wipers and washers and condition of wiper blades
- Check security and operation of handbrake
Main Service (Vehicle Exterior)
- Check headlamp and auxiliary lamp operation
- Check headlamp levelling system (where applicable)
- Remove road wheels
- Inspect brake pads for wear, calipers for leaks and discs for condition
- Refit road wheels to original hub position
- Check operation of all doors, bonnet and tail door locks
- Lubricate all hinges, door-check mechanisms, bonnet catches and fuel flaps
Main Service (Under Bonnet)
- Check cooling and heater systems for leaks, hoses for security and condition
- Check brake servo hose for security and condition
- Check condition of heater plug wiring for fraying, chafing and deterioration (200 TDi)
- Check ignition wiring and H.T. leads for fraying, chafing and deterioration
- Check distributor cap, check for cracks and tracking
- Check crankcase breathing system for leaks, hoses for security and condition
- Check condition of driving belts (adjust if required)
- Check throttle and automatic transmission cable operation
- Check/top up automatic transmission fluid
- Check/top up cooling system
- Check/top up fluid in power steering reservoir
- Check/top up clutch fluid reservoirs
- Check/top up brake fluid reservoirs
- Check/top up windscreen and rear washer reservoir
- Lubricate accelerator control linkages and pedal pivot
- Check/adjust ignition timing
- Check/adjust engine idle speed (200 TDi)
- Check/adjust steering box
- Remove battery connections - clean, grease and refit
- Visually check intercooler for external obstructions (200 TDi)
Main Service (Under Vehicle)
- Renew engine oil and filter (200 TDi)
- Renew engine oil and filter (V8 engine only)
- Check/top up gearbox oil
- Check/top up transfer box oil
- Check/top up front axle oil
- Check/top up swivel pin housing oil
- Check/top up rear axle oil
- Lubricate propeller shaft sliding joints
- Lubricate propeller shaft universal joints
- Lubricate handbrake mechanical linkage
- Visually check brake, fuel, clutch pipes/unions for chafing, leaks and corrosion
- Check exhaust system for leaks, security and damage
- Check for fluid leaks from power, manual steering and suspension systems, hydraulic pipes and unions for chafing and corrosion
- Check/tighten steering unit and steering rod ball joint fixings, check condition of ball joints and dust covers
- Check air harness pipes for security and damage
- Check air springs for security and damage
- Check shock absorbers/height sensors and harness assembly for leakage and damage
- Check tightness of propeller shaft coupling bolts
- Check/tighten front and rear axle suspension link fixings, check condition of mounting rubbers
- Check for oil leaks from engine and transmission
- Check/tighten fuel tank fixings
- Check security of towing bracket
- Check chassis frame and brackets for damage
- Check condition of engine mounting rubbers
- Check road wheel speed sensor electrical harness for damage (ABS only)
- Adjust handbrake if required
- Carry out road roller test
- Endorse service record and report any unusual features of vehicle condition and additional work required
Back to top
36 Months or 36,000 Miles/60,000 Km (which ever occurs first)
Main Service (Vehicle Interior)
- Check condition and security of seats and seatbelts, seatbelt mountings, seatbelt buckles and operation of inertia seatbelts
- Check operation of electrical, memory, heated and mechanical seats (where applicable)
- Check operation of foot brake and clutch
- Check operation of all lamps, horns, warning indicators
- Check operation of front/rear wipers and washers and condition of wiper blades
- Check security and operation of handbrake
Main Service (Vehicle Exterior)
- Check headlamp and auxiliary lamp operation
- Check headlamp levelling system (where applicable)
- Remove road wheels
- Inspect brake pads for wear, calipers for leaks and discs for condition
- Refit road wheels to original hub position
- Check operation of all doors, bonnet and tail door locks
- Lubricate all hinges, door-check mechanisms, bonnet catches and fuel flaps
Main Service (Under Bonnet)
- Check cooling and heater systems for leaks, hoses for security and condition
- Check brake servo hose for security and condition
- Check condition of heater plug wiring for fraying, chafing and deterioration (200 TDi)
- Check ignition wiring and H.T. leads for fraying, chafing and deterioration
- Check distributor cap, check for cracks and tracking
- Renew spark plugs
- Check/adjust valve clearances (at first 6,000 miles and every 12,000) (200 TDi)
- Renew fuel filter element (200 TDi)
- Check crankcase breathing system for leaks, hoses for security and condition
- Renew air cleaner element(s)
- Check air cleaner dump valve, clean or renew
- Clean engine breather filter
- Check condition of driving belts (adjust if required)
- Check throttle and automatic transmission cable operation
- Check/top up automatic transmission fluid
- Check/top up cooling system
- Check/top up fluid in power steering reservoir
- Check/top up clutch fluid reservoirs
- Check/top up brake fluid reservoirs
- Check/top up windscreen and rear washer reservoir
- Lubricate accelerator control linkages and pedal pivot
- Check/adjust ignition timing
- Check/adjust engine idle speed (200 TDi)
- Check/adjust steering box
- Remove battery connections - clean, grease and refit
- Visually check intercooler for external obstructions (200 TDi)
Main Service (Under Vehicle)
- Renew engine oil and filter (200 TDi)
- Renew engine oil and filter (V8 engine only)
- Check/top up gearbox oil
- Check/top up transfer box oil
- Check/top up front axle oil
- Check/top up swivel pin housing oil
- Check/top up rear axle oil
- Lubricate propeller shaft sliding joints
- Lubricate propeller shaft universal joints
- Lubricate handbrake mechanical linkage
- Visually check brake, fuel, clutch pipes/unions for chafing, leaks and corrosion
- Check exhaust system for leaks, security and damage
- Check for fluid leaks from power, manual steering and suspension systems, hydraulic pipes and unions for chafing and corrosion
- Check/tighten steering unit and steering rod ball joint fixings, check condition of ball joints and dust covers
- Check air harness pipes for security and damage
- Check air springs for security and damage
- Check shock absorbers/height sensors and harness assembly for leakage and damage
- Check tightness of propeller shaft coupling bolts
- Ensure front and rear axle breathers are free from obstruction
- Check/tighten front and rear axle suspension link fixings, check condition of mounting rubbers
- Check for oil leaks from engine and transmission
- Clean fuel sedimentor (200 TDi)
- Drain flywheel housing if drain plug is fitted for wading (refit)
- Check/tighten fuel tank fixings
- Check security of towing bracket
- Check chassis frame and brackets for damage
- Check condition of engine mounting rubbers
- Check road wheel speed sensor electrical harness for damage (ABS only)
- Adjust handbrake if required
- Carry out road roller test
- Endorse service record and report any unusual features of vehicle condition and additional work required
Back to top
42 Months or 42,000 Miles/70,000 Km (which ever occurs first)
Main Service (Vehicle Interior)
- Check condition and security of seats and seatbelts, seatbelt mountings, seatbelt buckles and operation of inertia seatbelts
- Check operation of electrical, memory, heated and mechanical seats (where applicable)
- Check operation of foot brake and clutch
- Check operation of all lamps, horns, warning indicators
- Check operation of front/rear wipers and washers and condition of wiper blades
- Check security and operation of handbrake
Main Service (Vehicle Exterior)
- Check headlamp and auxiliary lamp operation
- Check headlamp levelling system (where applicable)
- Remove road wheels
- Inspect brake pads for wear, calipers for leaks and discs for condition
- Refit road wheels to original hub position
- Check operation of all doors, bonnet and tail door locks
- Lubricate all hinges, door-check mechanisms, bonnet catches and fuel flaps
Main Service (Under Bonnet)
- Check cooling and heater systems for leaks, hoses for security and condition
- Check brake servo hose for security and condition
- Check condition of heater plug wiring for fraying, chafing and deterioration (200 TDi)
- Check ignition wiring and H.T. leads for fraying, chafing and deterioration
- Check distributor cap, check for cracks and tracking
- Check crankcase breathing system for leaks, hoses for security and condition
- Check condition of driving belts (adjust if required)
- Check throttle and automatic transmission cable operation
- Check/top up automatic transmission fluid
- Check/top up cooling system
- Check/top up fluid in power steering reservoir
- Check/top up clutch fluid reservoirs
- Check/top up brake fluid reservoirs
- Check/top up windscreen and rear washer reservoir
- Lubricate accelerator control linkages and pedal pivot
- Check/adjust ignition timing
- Check/adjust engine idle speed (200 TDi)
- Check/adjust steering box
- Remove battery connections - clean, grease and refit
- Visually check intercooler for external obstructions (200 TDi)
Main Service (Under Vehicle)
- Renew engine oil and filter (200 TDi)
- Renew engine oil and filter (V8 engine only)
- Check/top up gearbox oil
- Check/top up transfer box oil
- Check/top up front axle oil
- Check/top up swivel pin housing oil
- Check/top up rear axle oil
- Lubricate propeller shaft sliding joints
- Lubricate propeller shaft universal joints
- Lubricate handbrake mechanical linkage
- Visually check brake, fuel, clutch pipes/unions for chafing, leaks and corrosion
- Check exhaust system for leaks, security and damage
- Check for fluid leaks from power, manual steering and suspension systems, hydraulic pipes and unions for chafing and corrosion
- Check/tighten steering unit and steering rod ball joint fixings, check condition of ball joints and dust covers
- Check air harness pipes for security and damage
- Check air springs for security and damage
- Check shock absorbers/height sensors and harness assembly for leakage and damage
- Check tightness of propeller shaft coupling bolts
- Check/tighten front and rear axle suspension link fixings, check condition of mounting rubbers
- Check for oil leaks from engine and transmission
- Check/tighten fuel tank fixings
- Check security of towing bracket
- Check chassis frame and brackets for damage
- Check condition of engine mounting rubbers
- Check road wheel speed sensor electrical harness for damage (ABS only)
- Adjust handbrake if required
- Carry out road roller test
- Endorse service record and report any unusual features of vehicle condition and additional work required
Back to top
48 Months or 48,000 Miles/80,000 Km (which ever occurs first)
Main Service (Vehicle Interior)
- Check condition and security of seats and seatbelts, seatbelt mountings, seatbelt buckles and operation of inertia seatbelts
- Check operation of electrical, memory, heated and mechanical seats (where applicable)
- Check operation of foot brake and clutch
- Check operation of all lamps, horns, warning indicators
- Check operation of front/rear wipers and washers and condition of wiper blades
- Check security and operation of handbrake
- Depressurise air suspension system
- Renew compressor inlet filter
- Remove/refit air reservoir drain plug (if evidence of water in system, replace air dryer)
Main Service (Vehicle Exterior)
- Check headlamp and auxiliary lamp operation
- Check headlamp levelling system (where applicable)
- Remove road wheels
- Inspect brake pads for wear, calipers for leaks and discs for condition
- Renew fuel filter (V8i only)
- Refit road wheels to original hub position
- Check operation of all doors, bonnet and tail door locks
- Lubricate all hinges, door-check mechanisms, bonnet catches and fuel flaps
Main Service (Under Bonnet)
- Check cooling and heater systems for leaks, hoses for security and condition
- Check brake servo hose for security and condition
- Check condition of heater plug wiring for fraying, chafing and deterioration (200 TDi)
- Check ignition wiring and H.T. leads for fraying, chafing and deterioration
- Check distributor cap, check for cracks and tracking
- Lubricate distributor rotor spindle with rotor arm removed (V8 engines only)
- Renew spark plugs
- Check/adjust valve clearances (at first 6,000 miles and every 12,000) (200 TDi)
- Renew fuel filter element (200 TDi)
- Check crankcase breathing system for leaks, hoses for security and condition
- Renew air cleaner element(s)
- Check air cleaner dump valve, clean or renew
- Clean engine breather filter
- Clean plenum chamber ventilation passageway (V8 engine only)
- Renew charcoal canister (V8 engine only)
- Check condition of driving belts (adjust if required)
- Check throttle and automatic transmission cable operation
- Check/top up cooling system
- Check/top up fluid in power steering reservoir
- Check/top up clutch fluid reservoirs
- Check/top up brake fluid reservoirs
- Check/top up windscreen and rear washer reservoir
- Lubricate accelerator control linkages and pedal pivot
- Check/adjust ignition timing
- Check/adjust engine idle speed (200 TDi)
- Check/adjust steering box
- Remove battery connections - clean, grease and refit
- Visually check intercooler for external obstructions (200 TDi)
Main Service (Under Vehicle)
- Renew engine oil and filter (200 TDi)
- Renew engine oil and filter (V8 engine only)
- Renew gearbox oil
- Renew transfer box oil
- Renew automatic transmission fluid and filter
- Renew front axle oil
- Renew swivel pin housing oil
- Renew rear axle oil
- Lubricate propeller shaft sliding joints
- Lubricate propeller shaft universal joints
- Lubricate handbrake mechanical linkage
- Visually check brake, fuel, clutch pipes/unions for chafing, leaks and corrosion
- Check exhaust system for leaks, security and damage
- Check for fluid leaks from power, manual steering and suspension systems, hydraulic pipes and unions for chafing and corrosion
- Check/tighten steering unit and steering rod ball joint fixings, check condition of ball joints and dust covers
- Check air harness pipes for security and damage
- Check air springs for security and damage
- Check shock absorbers/height sensors and harness assembly for leakage and damage
- Check tightness of propeller shaft coupling bolts
- Ensure front and rear axle breathers are free from obstruction
- Check/tighten front and rear axle suspension link fixings, check condition of mounting rubbers
- Check for oil leaks from engine and transmission
- Clean fuel sedimentor (200 TDi)
- Drain flywheel housing if drain plug is fitted for wading (refit)
- Check/tighten fuel tank fixings
- Check security of towing bracket
- Check chassis frame and brackets for damage
- Check condition of engine mounting rubbers
- Check road wheel speed sensor electrical harness for damage (ABS only)
- Adjust handbrake if required
- Carry out road roller test
- Endorse service record and report any unusual features of vehicle condition and additional work required
Back to top
54 Months or 54,000 Miles/90,000 Km (which ever occurs first)
Main Service (Vehicle Interior)
- Check condition and security of seats and seatbelts, seatbelt mountings, seatbelt buckles and operation of inertia seatbelts
- Check operation of electrical, memory, heated and mechanical seats (where applicable)
- Check operation of foot brake and clutch
- Check operation of all lamps, horns, warning indicators
- Check operation of front/rear wipers and washers and condition of wiper blades
- Check security and operation of handbrake
Main Service (Vehicle Exterior)
- Check headlamp and auxiliary lamp operation
- Check headlamp levelling system (where applicable)
- Remove road wheels
- Inspect brake pads for wear, calipers for leaks and discs for condition
- Refit road wheels to original hub position
- Check operation of all doors, bonnet and tail door locks
- Lubricate all hinges, door-check mechanisms, bonnet catches and fuel flaps
Main Service (Under Bonnet)
- Check cooling and heater systems for leaks, hoses for security and condition
- Check brake servo hose for security and condition
- Check condition of heater plug wiring for fraying, chafing and deterioration (200 TDi)
- Check ignition wiring and H.T. leads for fraying, chafing and deterioration
- Check distributor cap, check for cracks and tracking
- Check crankcase breathing system for leaks, hoses for security and condition
- Check condition of driving belts (adjust if required)
- Check throttle and automatic transmission cable operation
- Check/top up automatic transmission fluid
- Check/top up cooling system
- Check/top up fluid in power steering reservoir
- Check/top up clutch fluid reservoirs
- Check/top up brake fluid reservoirs
- Check/top up windscreen and rear washer reservoir
- Lubricate accelerator control linkages and pedal pivot
- Check/adjust ignition timing
- Check/adjust engine idle speed (200 TDi)
- Check/adjust steering box
- Remove battery connections - clean, grease and refit
- Visually check intercooler for external obstructions (200 TDi)
Main Service (Under Vehicle)
- Renew engine oil and filter (200 TDi)
- Renew engine oil and filter (V8 engine only)
- Check/top up gearbox oil
- Check/top up transfer box oil
- Check/top up front axle oil
- Check/top up swivel pin housing oil
- Check/top up rear axle oil
- Lubricate propeller shaft sliding joints
- Lubricate propeller shaft universal joints
- Lubricate handbrake mechanical linkage
- Visually check brake, fuel, clutch pipes/unions for chafing, leaks and corrosion
- Check exhaust system for leaks, security and damage
- Check for fluid leaks from power, manual steering and suspension systems, hydraulic pipes and unions for chafing and corrosion
- Check/tighten steering unit and steering rod ball joint fixings, check condition of ball joints and dust covers
- Check air harness pipes for security and damage
- Check air springs for security and damage
- Check shock absorbers/height sensors and harness assembly for leakage and damage
- Check tightness of propeller shaft coupling bolts
- Check/tighten front and rear axle suspension link fixings, check condition of mounting rubbers
- Check for oil leaks from engine and transmission
- Check/tighten fuel tank fixings
- Check security of towing bracket
- Check chassis frame and brackets for damage
- Check condition of engine mounting rubbers
- Check road wheel speed sensor electrical harness for damage (ABS only)
- Adjust handbrake if required
- Carry out road roller test
- Endorse service record and report any unusual features of vehicle condition and additional work required
Back to top
60 Months or 60,000 Miles/100,000 Km (which ever occurs first)
Main Service (Vehicle Interior)
- Check condition and security of seats and seatbelts, seatbelt mountings, seatbelt buckles and operation of inertia seatbelts
- Check operation of electrical, memory, heated and mechanical seats (where applicable)
- Check operation of foot brake and clutch
- Check operation of all lamps, horns, warning indicators
- Check operation of front/rear wipers and washers and condition of wiper blades
- Check security and operation of handbrake
Main Service (Vehicle Exterior)
- Check headlamp and auxiliary lamp operation
- Check headlamp levelling system (where applicable)
- Remove road wheels
- Inspect brake pads for wear, calipers for leaks and discs for condition
- Refit road wheels to original hub position
- Check operation of all doors, bonnet and tail door locks
- Lubricate all hinges, door-check mechanisms, bonnet catches and fuel flaps
Main Service (Under Bonnet)
- Check cooling and heater systems for leaks, hoses for security and condition
- Check brake servo hose for security and condition
- Check condition of heater plug wiring for fraying, chafing and deterioration (200 TDi)
- Check ignition wiring and H.T. leads for fraying, chafing and deterioration
- Check distributor cap, check for cracks and tracking
- Renew spark plugs
- Check/adjust valve clearances (at first 6,000 miles and every 12,000) (200 TDi)
- Renew fuel filter element (200 TDi)
- Check crankcase breathing system for leaks, hoses for security and condition
- Renew air cleaner element(s)
- Check air cleaner dump valve, clean or renew
- Clean engine breather filter
- Check condition of driving belts (adjust if required)
- Check throttle and automatic transmission cable operation
- Check/top up automatic transmission fluid
- Check/top up cooling system
- Check/top up fluid in power steering reservoir
- Check/top up clutch fluid reservoirs
- Check/top up brake fluid reservoirs
- Check/top up windscreen and rear washer reservoir
- Lubricate accelerator control linkages and pedal pivot
- Check/adjust ignition timing
- Check/adjust engine idle speed (200 TDi)
- Check/adjust steering box
- Remove battery connections - clean, grease and refit
- Visually check intercooler for external obstructions (200 TDi)
Main Service (Under Vehicle)
- Renew engine oil and filter (200 TDi)
- Renew engine oil and filter (V8 engine only)
- Check/top up gearbox oil
- Check/top up transfer box oil
- Check/top up front axle oil
- Check/top up swivel pin housing oil
- Check/top up rear axle oil
- Lubricate propeller shaft sliding joints
- Lubricate propeller shaft universal joints
- Lubricate handbrake mechanical linkage
- Visually check brake, fuel, clutch pipes/unions for chafing, leaks and corrosion
- Check exhaust system for leaks, security and damage
- Check for fluid leaks from power, manual steering and suspension systems, hydraulic pipes and unions for chafing and corrosion
- Check/tighten steering unit and steering rod ball joint fixings, check condition of ball joints and dust covers
- Check air harness pipes for security and damage
- Check air springs for security and damage
- Check shock absorbers/height sensors and harness assembly for leakage and damage
- Check tightness of propeller shaft coupling bolts
- Ensure front and rear axle breathers are free from obstruction
- Check/tighten front and rear axle suspension link fixings, check condition of mounting rubbers
- Check for oil leaks from engine and transmission
- Clean fuel sedimentor (200 TDi)
- Drain flywheel housing if drain plug is fitted for wading (refit)
- Check/tighten fuel tank fixings
- Check security of towing bracket
- Check chassis frame and brackets for damage
- Check condition of engine mounting rubbers
- Check road wheel speed sensor electrical harness for damage (ABS only)
- Adjust handbrake if required
- Carry out road roller test
- Endorse service record and report any unusual features of vehicle condition and additional work required
Back to top
66 Months or 66,000 Miles/110,000 Km (which ever occurs first)
Main Service (Vehicle Interior)
- Check condition and security of seats and seatbelts, seatbelt mountings, seatbelt buckles and operation of inertia seatbelts
- Check operation of electrical, memory, heated and mechanical seats (where applicable)
- Check operation of foot brake and clutch
- Check operation of all lamps, horns, warning indicators
- Check operation of front/rear wipers and washers and condition of wiper blades
- Check security and operation of handbrake
Main Service (Vehicle Exterior)
- Check headlamp and auxiliary lamp operation
- Check headlamp levelling system (where applicable)
- Remove road wheels
- Inspect brake pads for wear, calipers for leaks and discs for condition
- Refit road wheels to original hub position
- Check operation of all doors, bonnet and tail door locks
- Lubricate all hinges, door-check mechanisms, bonnet catches and fuel flaps
Main Service (Under Bonnet)
- Check cooling and heater systems for leaks, hoses for security and condition
- Check brake servo hose for security and condition
- Check condition of heater plug wiring for fraying, chafing and deterioration (200 TDi)
- Check ignition wiring and H.T. leads for fraying, chafing and deterioration
- Check distributor cap, check for cracks and tracking
- Check crankcase breathing system for leaks, hoses for security and condition
- Check condition of driving belts (adjust if required)
- Check throttle and automatic transmission cable operation
- Check/top up automatic transmission fluid
- Check/top up cooling system
- Check/top up fluid in power steering reservoir
- Check/top up clutch fluid reservoirs
- Check/top up brake fluid reservoirs
- Check/top up windscreen and rear washer reservoir
- Lubricate accelerator control linkages and pedal pivot
- Check/adjust ignition timing
- Check/adjust engine idle speed (200 TDi)
- Check/adjust steering box
- Remove battery connections - clean, grease and refit
- Visually check intercooler for external obstructions (200 TDi)
Main Service (Under Vehicle)
- Renew engine oil and filter (200 TDi)
- Renew engine oil and filter (V8 engine only)
- Check/top up gearbox oil
- Check/top up transfer box oil
- Check/top up front axle oil
- Check/top up swivel pin housing oil
- Check/top up rear axle oil
- Lubricate propeller shaft sliding joints
- Lubricate propeller shaft universal joints
- Lubricate handbrake mechanical linkage
- Visually check brake, fuel, clutch pipes/unions for chafing, leaks and corrosion
- Check exhaust system for leaks, security and damage
- Check for fluid leaks from power, manual steering and suspension systems, hydraulic pipes and unions for chafing and corrosion
- Check/tighten steering unit and steering rod ball joint fixings, check condition of ball joints and dust covers
- Check air harness pipes for security and damage
- Check air springs for security and damage
- Check shock absorbers/height sensors and harness assembly for leakage and damage
- Check tightness of propeller shaft coupling bolts
- Check/tighten front and rear axle suspension link fixings, check condition of mounting rubbers
- Check for oil leaks from engine and transmission
- Check/tighten fuel tank fixings
- Check security of towing bracket
- Check chassis frame and brackets for damage
- Check condition of engine mounting rubbers
- Check road wheel speed sensor electrical harness for damage (ABS only)
- Adjust handbrake if required
- Carry out road roller test
- Endorse service record and report any unusual features of vehicle condition and additional work required
Back to top
72 Months or 72,000 Miles/120,000 Km (which ever occurs first)
Main Service (Vehicle Interior)
- Check condition and security of seats and seatbelts, seatbelt mountings, seatbelt buckles and operation of inertia seatbelts
- Check operation of electrical, memory, heated and mechanical seats (where applicable)
- Check operation of foot brake and clutch
- Check operation of all lamps, horns, warning indicators
- Check operation of front/rear wipers and washers and condition of wiper blades
- Check security and operation of handbrake
- Depressurise air suspension system
- Renew compressor inlet filter
- Remove/refit air reservoir drain plug (if evidence of water in system, replace air dryer)
Main Service (Vehicle Exterior)
- Check headlamp and auxiliary lamp operation
- Check headlamp levelling system (where applicable)
- Remove road wheels
- Inspect brake pads for wear, calipers for leaks and discs for condition
- Refit road wheels to original hub position
- Check operation of all doors, bonnet and tail door locks
- Lubricate all hinges, door-check mechanisms, bonnet catches and fuel flaps
Main Service (Under Bonnet)
- Check cooling and heater systems for leaks, hoses for security and condition
- Check brake servo hose for security and condition
- Check condition of heater plug wiring for fraying, chafing and deterioration (200 TDi)
- Check ignition wiring and H.T. leads for fraying, chafing and deterioration
- Check distributor cap, check for cracks and tracking
- Lubricate distributor rotor spindle with rotor arm removed (V8 engines only)
- Renew spark plugs
- Check/adjust valve clearances (at first 6,000 miles and every 12,000) (200 TDi)
- Renew fuel filter element (200 TDi)
- Check crankcase breathing system for leaks, hoses for security and condition
- Renew air cleaner element(s)
- Check air cleaner dump valve, clean or renew
- Clean engine breather filter
- Clean plenum chamber ventilation passageway (V8 engine only)
- Check condition of driving belts (adjust if required)
- Check throttle and automatic transmission cable operation
- Check/top up cooling system
- Check/top up fluid in power steering reservoir
- Check/top up clutch fluid reservoirs
- Check/top up brake fluid reservoirs
- Check/top up windscreen and rear washer reservoir
- Lubricate accelerator control linkages and pedal pivot
- Check/adjust ignition timing
- Check/adjust engine idle speed (200 TDi)
- Check/adjust steering box
- Remove battery connections - clean, grease and refit
- Visually check intercooler for external obstructions (200 TDi)
Main Service (Under Vehicle)
- Renew engine oil and filter (200 TDi)
- Renew engine oil and filter (V8 engine only)
- Renew gearbox oil
- Renew transfer box oil
- Renew automatic transmission fluid and filter
- Renew front axle oil
- Renew swivel pin housing oil
- Renew rear axle oil
- Lubricate propeller shaft sliding joints
- Lubricate propeller shaft universal joints
- Lubricate handbrake mechanical linkage
- Visually check brake, fuel, clutch pipes/unions for chafing, leaks and corrosion
- Check exhaust system for leaks, security and damage
- Check for fluid leaks from power, manual steering and suspension systems, hydraulic pipes and unions for chafing and corrosion
- Check/tighten steering unit and steering rod ball joint fixings, check condition of ball joints and dust covers
- Check air harness pipes for security and damage
- Check air springs for security and damage
- Check shock absorbers/height sensors and harness assembly for leakage and damage
- Check tightness of propeller shaft coupling bolts
- Ensure front and rear axle breathers are free from obstruction
- Check/tighten front and rear axle suspension link fixings, check condition of mounting rubbers
- Check for oil leaks from engine and transmission
- Clean fuel sedimentor (200 TDi)
- Drain flywheel housing if drain plug is fitted for wading (refit)
- Check/tighten fuel tank fixings
- Check security of towing bracket
- Check chassis frame and brackets for damage
- Check condition of engine mounting rubbers
- Check road wheel speed sensor electrical harness for damage (ABS only)
- Adjust handbrake if required
- Carry out road roller test
- Endorse service record and report any unusual features of vehicle condition and additional work required
Back to top
78 Months or 78,000 Miles/130,000 Km (which ever occurs first)
Main Service (Vehicle Interior)
- Check condition and security of seats and seatbelts, seatbelt mountings, seatbelt buckles and operation of inertia seatbelts
- Check operation of electrical, memory, heated and mechanical seats (where applicable)
- Check operation of foot brake and clutch
- Check operation of all lamps, horns, warning indicators
- Check operation of front/rear wipers and washers and condition of wiper blades
- Check security and operation of handbrake
Main Service (Vehicle Exterior)
- Check headlamp and auxiliary lamp operation
- Check headlamp levelling system (where applicable)
- Remove road wheels
- Inspect brake pads for wear, calipers for leaks and discs for condition
- Refit road wheels to original hub position
- Check operation of all doors, bonnet and tail door locks
- Lubricate all hinges, door-check mechanisms, bonnet catches and fuel flaps
Main Service (Under Bonnet)
- Check cooling and heater systems for leaks, hoses for security and condition
- Check brake servo hose for security and condition
- Check condition of heater plug wiring for fraying, chafing and deterioration (200 TDi)
- Check ignition wiring and H.T. leads for fraying, chafing and deterioration
- Check distributor cap, check for cracks and tracking
- Check crankcase breathing system for leaks, hoses for security and condition
- Check condition of driving belts (adjust if required)
- Check throttle and automatic transmission cable operation
- Check/top up automatic transmission fluid
- Check/top up cooling system
- Check/top up fluid in power steering reservoir
- Check/top up clutch fluid reservoirs
- Check/top up brake fluid reservoirs
- Check/top up windscreen and rear washer reservoir
- Lubricate accelerator control linkages and pedal pivot
- Check/adjust ignition timing
- Check/adjust engine idle speed (200 TDi)
- Check/adjust steering box
- Remove battery connections - clean, grease and refit
- Visually check intercooler for external obstructions (200 TDi)
Main Service (Under Vehicle)
- Renew engine oil and filter (200 TDi)
- Renew engine oil and filter (V8 engine only)
- Check/top up gearbox oil
- Check/top up transfer box oil
- Check/top up front axle oil
- Check/top up swivel pin housing oil
- Check/top up rear axle oil
- Lubricate propeller shaft sliding joints
- Lubricate propeller shaft universal joints
- Lubricate handbrake mechanical linkage
- Visually check brake, fuel, clutch pipes/unions for chafing, leaks and corrosion
- Check exhaust system for leaks, security and damage
- Check for fluid leaks from power, manual steering and suspension systems, hydraulic pipes and unions for chafing and corrosion
- Check/tighten steering unit and steering rod ball joint fixings, check condition of ball joints and dust covers
- Check air harness pipes for security and damage
- Check air springs for security and damage
- Check shock absorbers/height sensors and harness assembly for leakage and damage
- Check tightness of propeller shaft coupling bolts
- Check/tighten front and rear axle suspension link fixings, check condition of mounting rubbers
- Check for oil leaks from engine and transmission
- Check/tighten fuel tank fixings
- Check security of towing bracket
- Check chassis frame and brackets for damage
- Check condition of engine mounting rubbers
- Check road wheel speed sensor electrical harness for damage (ABS only)
- Adjust handbrake if required
- Carry out road roller test
- Endorse service record and report any unusual features of vehicle condition and additional work required
Back to top
84 Months or 84,000 Miles/140,000 Km (which ever occurs first)
Main Service (Vehicle Interior)
- Check condition and security of seats and seatbelts, seatbelt mountings, seatbelt buckles and operation of inertia seatbelts
- Check operation of electrical, memory, heated and mechanical seats (where applicable)
- Check operation of foot brake and clutch
- Check operation of all lamps, horns, warning indicators
- Check operation of front/rear wipers and washers and condition of wiper blades
- Check security and operation of handbrake
Main Service (Vehicle Exterior)
- Check headlamp and auxiliary lamp operation
- Check headlamp levelling system (where applicable)
- Remove road wheels
- Inspect brake pads for wear, calipers for leaks and discs for condition
- Refit road wheels to original hub position
- Check operation of all doors, bonnet and tail door locks
- Lubricate all hinges, door-check mechanisms, bonnet catches and fuel flaps
Main Service (Under Bonnet)
- Check cooling and heater systems for leaks, hoses for security and condition
- Check brake servo hose for security and condition
- Check condition of heater plug wiring for fraying, chafing and deterioration (200 TDi)
- Check ignition wiring and H.T. leads for fraying, chafing and deterioration
- Check distributor cap, check for cracks and tracking
- Renew spark plugs
- Check/adjust valve clearances (at first 6,000 miles and every 12,000) (200 TDi)
- Renew fuel filter element (200 TDi)
- Check crankcase breathing system for leaks, hoses for security and condition
- Renew air cleaner element(s)
- Check air cleaner dump valve, clean or renew
- Clean engine breather filter
- Check condition of driving belts (adjust if required)
- Check throttle and automatic transmission cable operation
- Check/top up automatic transmission fluid
- Check/top up cooling system
- Check/top up fluid in power steering reservoir
- Check/top up clutch fluid reservoirs
- Check/top up brake fluid reservoirs
- Check/top up windscreen and rear washer reservoir
- Lubricate accelerator control linkages and pedal pivot
- Check/adjust ignition timing
- Check/adjust engine idle speed (200 TDi)
- Check/adjust steering box
- Remove battery connections - clean, grease and refit
- Visually check intercooler for external obstructions (200 TDi)
Main Service (Under Vehicle)
- Renew engine oil and filter (200 TDi)
- Renew engine oil and filter (V8 engine only)
- Check/top up gearbox oil
- Check/top up transfer box oil
- Check/top up front axle oil
- Check/top up swivel pin housing oil
- Check/top up rear axle oil
- Lubricate propeller shaft sliding joints
- Lubricate propeller shaft universal joints
- Lubricate handbrake mechanical linkage
- Visually check brake, fuel, clutch pipes/unions for chafing, leaks and corrosion
- Check exhaust system for leaks, security and damage
- Check for fluid leaks from power, manual steering and suspension systems, hydraulic pipes and unions for chafing and corrosion
- Check/tighten steering unit and steering rod ball joint fixings, check condition of ball joints and dust covers
- Check air harness pipes for security and damage
- Check air springs for security and damage
- Check shock absorbers/height sensors and harness assembly for leakage and damage
- Check tightness of propeller shaft coupling bolts
- Ensure front and rear axle breathers are free from obstruction
- Check/tighten front and rear axle suspension link fixings, check condition of mounting rubbers
- Check for oil leaks from engine and transmission
- Clean fuel sedimentor (200 TDi)
- Drain flywheel housing if drain plug is fitted for wading (refit)
- Check/tighten fuel tank fixings
- Check security of towing bracket
- Check chassis frame and brackets for damage
- Check condition of engine mounting rubbers
- Check road wheel speed sensor electrical harness for damage (ABS only)
- Adjust handbrake if required
- Carry out road roller test
- Endorse service record and report any unusual features of vehicle condition and additional work required
Back to top
90 Months or 90,000 Miles/150,000 Km (which ever occurs first)
Main Service (Vehicle Interior)
- Check condition and security of seats and seatbelts, seatbelt mountings, seatbelt buckles and operation of inertia seatbelts
- Check operation of electrical, memory, heated and mechanical seats (where applicable)
- Check operation of foot brake and clutch
- Check operation of all lamps, horns, warning indicators
- Check operation of front/rear wipers and washers and condition of wiper blades
- Check security and operation of handbrake
Main Service (Vehicle Exterior)
- Remove road wheels
- Inspect brake pads for wear, calipers for leaks and discs for condition
- Refit road wheels to original hub position
Main Service (Under Bonnet)
- Check crankcase breathing system for leaks, hoses for security and condition
- Check condition of driving belts (adjust if required)
- Check throttle and automatic transmission cable operation
- Check/top up automatic transmission fluid
- Check/top up cooling system
- Check/top up fluid in power steering reservoir
- Check/top up clutch fluid reservoirs
- Check/top up brake fluid reservoirs
- Check/top up windscreen and rear washer reservoir
- Lubricate accelerator control linkages and pedal pivot
- Check/adjust ignition timing
- Check/adjust engine idle speed (200 TDi)
- Check/adjust steering box
- Remove battery connections - clean, grease and refit
- Visually check intercooler for external obstructions (200 TDi)
Main Service (Under Vehicle)
- Renew engine oil and filter (200 TDi)
- Renew engine oil and filter (V8 engine only)
- Check/top up gearbox oil
- Check/top up transfer box oil
- Check/top up front axle oil
- Check/top up swivel pin housing oil
- Check/top up rear axle oil
- Lubricate propeller shaft sliding joints
- Lubricate propeller shaft universal joints
- Lubricate handbrake mechanical linkage
- Visually check brake, fuel, clutch pipes/unions for chafing, leaks and corrosion
- Check exhaust system for leaks, security and damage
- Check for fluid leaks from power, manual steering and suspension systems, hydraulic pipes and unions for chafing and corrosion
- Check/tighten steering unit and steering rod ball joint fixings, check condition of ball joints and dust covers
- Check air harness pipes for security and damage
- Check air springs for security and damage
- Check shock absorbers/height sensors and harness assembly for leakage and damage
- Check tightness of propeller shaft coupling bolts
- Check/tighten front and rear axle suspension link fixings, check condition of mounting rubbers
- Check for oil leaks from engine and transmission
- Check/tighten fuel tank fixings
- Check security of towing bracket
- Check chassis frame and brackets for damage
- Check condition of engine mounting rubbers
- Check road wheel speed sensor electrical harness for damage (ABS only)
- Adjust handbrake if required
- Carry out road roller test
- Endorse service record and report any unusual features of vehicle condition and additional work required
Back to top